Process and equipment
Equipments introduction
HOME > Process and equipment > Equipments introduction
▶ Equipments introduction
| holding | 인쇄 8도 1대/ 인쇄 7도 1대 |
|---|---|
| Use width | 400mm~1,000mm |
| Purpose | FILM류/종이/ETC |
| Production rate | 80~220 m/min |
| It gets the respectively different color tone of the intaglio copper plate (iron) stained with ink and transfer to a printing matter (transparent film) so produces a large quantity of reproduction. The color tone control method is automatic control in use of the color controller, and printing state can be confirmed real-time by the use of screen. | |
▶ Extruding lamination
| holding | Extruding lamination 1대 |
|---|---|
| Use width | 400mm~1,000mm |
| Extrusion thickness | 8㎛ ~ 30㎛ |
| Purpose | FILM류/금속/종이의 합지용 |
| Production rate | 80~150 m/min |
| It is a method to “rapidly” cool and laminate the polyethylene raw material that heated, melted the space between the anchor-coated first-class paper (printed matter, transparent film) and the second-class paper at 300~330℃ temperature then passed through the slit-type die by using a cooling roller. | |
▶ Coextrusion tandem
| holding | 코-엑스 텐덤 1대 |
|---|---|
| Use width | 400mm~1,000mm |
| Extrusion thickness | 8㎛ ~ 30㎛ |
| Purpose | FILM류/액상전용설비 |
| Production rate | 80~150 m/min |
| Structure is same as the extruding lamination machine. But it is possible to laminate 3 kinds of film at a time by the use of 2 다이스. | |
▶ Dry lamination
| holding | 드라이 라미네이션 1호기 | 드라이 라미네이션 2호기 |
|---|---|---|
| Use width | 400mm~1,000mm | 400mm~ 1,000mm |
| Drying method | CHAMBER내부의 열풍에 의한 건조 |
CHAMBER내부의 열풍에 의한 건조 |
| Purpose | FILM류/금속/종이의 합지용 |
FILM류/금속/종이의 합지용 |
| Production rate | 50~150 m/min | 50~200 m/min |
| Dry by a hot wind in the CHAMBER. It is a method that apply solvent type adhesives to the first-class paper (printed matter, transparent film) uniformly, pass the film through the chamber whose temperature was maintained at about 90℃~100℃ with a steam heater then remove the remaining solvent on the film surface so extrude the film and film through the heating roller and is suitable to a retort and sterilizing product. | ||
▶ Slitting machine
| holding | 분단기 4대 리와인더 1대 |
|---|---|
| Use width | MAX 1,100mm |
| Roll OD | MAX 550mm |
| Purpose | FILM/종이의 단면도에 의한 절단 |
| Production rate | MAX 300m/min |
| It slits the laminated product to meet the standard in the clean room and ship out the end products in accordance with the thorough quality control standard at the same time. | |
▶ Bag making machine
| holding | 일체형 스탠딩 지퍼 1대 삼방 가공기 2대 삼방 스텐딩 2대 삼방 지퍼 가공기 1대 M방 가공기 2대 톰슨 가공기 1대 |
|---|---|
| Use width | MAX 1,100mm |
| Roll OD | MAX 900mm |
| Purpose | 합지된 필름을 봉투로 가공 |
| Production rate | MAX 150m/min |
| It makes the laminated product into a bag meeting the standard in the clean room. | |
